Tabla de contenido
Installing SteelHead Product Family Appliances (English)
If your appliance requires rails, attach the rails to each side of the appliance. For details, see the Rack
Installation Guide.
Align the screw holes on the flanges with the screw holes on the rack.
Insert and tighten the screws on each side of the appliance.
Note: Do not cover the air vents on CX255, CX555, CX570, CX755, CX770, 150, 250, and 550 appliances. Doing so restricts
air flow and can damage the unit or reduce performance. CX255, CX555, CX570, CX755, CX770, 150, 250, and 550
appliances are desktop models; they do not need to be mounted to a rack.
3. Connecting the Power
If your appliance has a master power switch, make sure it is in the off position.
Plug the power cord or cords into the appliance and an AC outlet.
If your appliance has a master power switch, press in the master power switch (ON).
Press in the system power switch on the front of the appliance.
Caution: In all European electrical environments, you must ground the Green/Yellow tab on the power cord. If you do
not ground the Green/Yellow tab, it can cause electrical shock.
4. Connecting to the SteelHead
Plug the serial cable into the Console port and a terminal.
Depending on your appliance, the Console port is either a DB9F port or an RJ45 port. (For port details
for your appliance model, see the specification appendix in the installation guide for your product.)
The appropriate console cable ships with your appliance.
8
Installing the SteelHead
Getting Started Guide
Tabla de contenido
