Parts Of The Flash; Installing The Batteries; Turning The Unit On - FujiFilm EF-X20 El Manual Del Propietario

Parts of the Flash

1 Exposure setting dial
2 Indicator lamp
3 ON/OFF button
4 TEST button (READY lamp)
5 Lever for setting wide panel
6 Light-emitting section
7 Wide panel (built-in)
8 Wireless slave fl ash sensor
9 Battery cover
10 Mounting lock releasing button
11 Wireless slave fl ash selector
12 Hot-shoe contacts
13 Mounting foot
EN-2

Installing the Batteries

1
Open the battery cover.
2 Insert two new AAA alkaline or
Ni-MH batteries in the orientation
shown in the label inside the bat-
tery compartment.
Q The unit may malfunction if the batter-
ies are not in the correct orientation.
3 Close the battery cover.

Turning the Unit On

Press the ON/OFF button. The TEST but-
ton (READY lamp) will blink as the fl ash
charges. Charging is complete when
the lamp stops blinking.
R The indicator lamp lights when the unit is on.
R To turn the unit off , press the ON/OFF button again. The indi-
cator lamp will turn off .
Q Turn the fl ash off before mounting it on the hot shoe. If the
fl ash is on, it may short the hot-shoe contacts, causing the
fl ash to fi re unexpectedly or other product malfunction.
ENGLISH