Setting Up; Initial Settings; Configuring The Network - Sony PWS-100TD1 Manual Del Usuario

Operation of the unit using the following cables has been
verified.
• DisplayPort → HDMI Cable: StarTech.com DP2HDS
DisplayPort to HDMI Active Adapter
• DisplayPort → DVI Cable: XFX Inc MA-AP01-PD1K
Active DisplayPort to DVI Adapter

Setting Up

Initial Settings

Before using the unit, configure the Windows settings
within the unit. The description below describes the
standard settings in Windows 8.
Note
To reboot the unit, first shut down the unit and then turn the On/Standby
button on the front panel on again, without rebooting Windows.
1
Connect a keyboard and mouse to the USB connectors
on the front panel, and connect a monitor to the
DisplayPort connector or HDMI connector on the rear
panel.
2
Set the On/Standby button to the On position.
3
When the Windows login screen appears, enter "tds"
as the user name, enter "tds" as the password, and log
in.
Setting the Windows interface language
1
Hold down the Windows key and press the X key, then
select [Control Panel] from the displayed menu.
2
Select [Clock, Language, and Region] > [Language].
3
Select [Add language] to add a language.
4
Select the language to add, then click [Add].
5
Select the language to use and click [Move up] until
the language is displayed at the top.
6
Sign out and then sign in again.

Configuring the network

1
Connect a LAN cable to the LAN connector on the rear
panel of the unit, and connect the other end to the
network.
2
Click [View network status and tasks] under [Network
and Internet] in the control panel.
3
Click [Connections] > [LAN 1/2].
4
Click the [Properties] button.
29
Setting Up