Install The Battery Pack; Remove The Battery Pack; Operation; Examine The Chain Oil - GreenWorks Commercial 48TH12 Manual Del Operador

IMPORTANT
Do not use dirty, used or contaminated oil. Damage can
occur to the bar or chain.
8.3

INSTALL THE BATTERY PACK

18
WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read and understand the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.4

REMOVE THE BATTERY PACK

1. Push and hold the battery release button (18).
2. Remove the battery pack from the machine.
9

OPERATION

Remove the battery pack and keep hands clear of the lock
out button when you move the machine.
IMPORTANT
Examine the chain tension before each use.
9.1

EXAMINE THE CHAIN OIL

NOTE
Do not use the machine without sufficient chain oil.
1. Examine the oil level of the machine from the oil
indicator.
2. Add oil if necessary.
NOTE
English
9.2

HOLD THE MACHINE

1. Hold the chainsaw with your right hand on the top handle
and left hand on the front handle.
2. Hold the handles with the thumbs and the fingers around
them.
3. Make sure that your left hand holds the front handle and
your thumb is below the handle.
9.3

START THE MACHINE

1. Press the on/off switch (40).
2. Press the lock-out button (4).
3. Press the trigger (5) while you hold the lock-out button.
4. Release the lock-out button.
The machine has an automatic stop function that stops the
machine if you do not use it for one minute.
The chain brake must be disengaged for the chain saw to
start. Activate the brake by moving the front hand guard
forwards.
9.4

STOP THE MACHINE

1. Release the trigger to stop the machine.
9
40
4
5
NOTE
IMPORTANT
EN