Panasonic Lumix DMW-YAGHPP Instrucciones De Funcionamiento página 9

Names and Functions of Components
9
TC IN terminal (BNC)
Timecodes are input here.
Input a reference timecode to this terminal
to synchronize the digital camera's
timecode to that of external equipment.
yUse a 5C-FB equivalent double-shielded
y
cable to connect to this terminal.
10
SDI OUT [1, 2, 3, 4] terminals (BNC)
Terminals reserved for SDI output.
Resolution setting
C4K, 4K
<1.5G-SDI Square Division>
FHD (1080/59.94p, 1080/50p)
<3G-SDI>
FHD (Other than the above), HD
<1.5G-SDI>
yUse a 5C-FB equivalent double-shielded
y
cable to connect to this terminal.
yWhen outputting videos that do not
y
include timecodes (e.g., when [Rec
Format] is set to [MP4] on the digital
camera), a timecode will not be output.
11
AUDIO IN [CH1, CH2] terminals
(XLR, 3-pin)
Connects to audio equipment or
microphones.
PUSH
2
1
3
12
LINE / MIC / +48V switches
Switch these based on the audio
equipment connected to the AUDIO IN
CH1 or AUDIO IN CH2 terminal.
LINE:
When line input audio equipment is
connected. (Input level: 0 dBu)
MIC:
When an external microphone is
connected.
(Input level: -50 dBu)
+48V:
When a phantom microphone (a
microphone that requires a +48 V power
supply) is connected.
Output
terminal
1 to 4
1, 2
(same signal)
1 to 4
(same signal)
Pin no. Signal
1 GND
2 AUDIO IN (H)
3 AUDIO IN (C)
(continued)
A power supply of +48 V will be
provided to the AUDIO IN CH1 and
AUDIO IN CH2 terminals.
13
STEREO / MONO switch
Switches the audio that is input to the
AUDIO IN CH1 and AUDIO IN CH2
terminals to stereo or monaural audio.
STEREO:
Two-channel stereo audio.
MONO:
Monaural audio.
The audio that is input to the AUDIO
IN CH1 terminal will also be input to
AUDIO IN CH2.
14
REC LEVEL dials
Adjust the audio inputs to the AUDIO
IN CH1 and AUDIO IN CH2 terminals
individually.
15
Level meters
Display individual indicators for the audio
input levels of the AUDIO IN CH1 and
AUDIO IN CH2 terminals.
The indicators light red when the audio
levels exceed 0 dB.
Adjust the REC LEVEL dials (
prevent the audio levels from exceeding
0 dB.
16
Power indicator
Lights when the connected digital camera
is turned on.
17
Tripod attachment holes
Compatible with 1/4-20 UNC and 3/8-16
UNC screws.
Use the appropriate hole according to the
diameter of the tripod screw.
yThe holes have a depth of 5.5 mm.
y
When attaching a tripod to the unit, do
not tighten the screw with excessive
force.
18
Intake vent
19
Exhaust vent
14
) to
9
(ENG) VQT5K48