JVC KB-ND5503 Instrucciones De Actualización página 4

Press to eject the disc 1, and insert the disc 2.
• It takes about 70 minutes to complete installing the Map data in the disc 2.
Navigation Database Update
Updating . . . 2/2
When the installation is completed, "Press ENT to start." appears on the
display.
Suspending Update
This can only be done during step 1 when "Navigation
Database Update" is displayed on the screen, as shown
on the right. During "Navigation Firmware Update"
(step 2), power cannot be interrupted. Any interruption
of the firmware update may cause unit malfunction.
If you press BACK during the database update, "Stop update?" appears on
the display. Pressing ENT suspends the update and the disc is ejected. Please
remember which disc (disc 1 or disc 2) you stopped the update at.
When you are ready to resume the update process, insert the same disc again.
When the disc is loaded, "Start update?" appears on the display. Press ENT to
start the update again. If the different disc is inserted, the update will not restart.
• The update is also suspended when the ignition switch or ACC is off.
• SUSPENDING OR RESUMING THE UPDATE CAUSES NO FAILURE OF
THE SYSTEM THOUGH THE UPDATE TAKES A LONG TIME.
Navigation Firmware Update
Press ENT to start.
Don't turn off or
start the engine.
3
Navigation Database Update
Stop update?
Press ENT to stop.
Press BACK to continue.