Vaude INVENIO UL 2P Manual Del Usuario página 13

Please note: It is best to wrap the webbings of the
guy ropes around the poles (d).
8. Ensure that there is sufficient ventilation. The porch
is ideal for individual adjustments.
diSASSEmBLY – GENERAL iNFoRmATioN:
• Remove all objects from inside the tent.
• Self-supporting constructions are easy to shake out
to conveniently remove leaves, sand, etc.
• Allow the tent some time to dry, with the tent floor
facing upward.
• If you are unable to let the tent dry immediately,
shake it out and allow it to dry within 12 hours of
use to prevent mold and mildew stains.
• When disassembling the tent, never pull the poles
through the channels; push them instead.
• When storing the tent in the pack, make sure neit-
her the tent pegs nor the poles create pressure
marks that could damage the tent wall.
• Close all zips before disassembly and roll up the guy
lines - this will make it easier to assemble the tent
the next time you use it!
diSASSEmBLY – SPECiFiC To EACH modEL:
1. Pull out the tent pegs.
2. Unhook the ropes.
3. Remove first the ridge pole and then the other poles.
4. Fold up the poles and roll them up with the tent, if
possible. Do not force the poles into the storage
bag if it is full as this may cause damage to the sto-
rage bag and tent.
ENGLISH
11