PROZIS airia Manual Del Usuario página 4

EN
Auto Power ON
The soundpods switch on automatically as soon as you take them out from the
charging case. You will hear a
Power On
flash for 1 second.
Auto Power OFF
The soundpods switch off automatically when placed back in the charging case. You
will hear a message and the red indicator light will flash for 1 second.
Power Off
PAIRING
Pairing the right and left soundpod
When you use the soundpods for the first time, follow the pairing procedure below:
• The sounpods switch on automatically as soon as you take them out of the charging
case, or you can also switch them on manually by pressing and holding both
multi-function buttons for 2 seconds.
• The left and right soundpods are automatically paired after 20 seconds. The LED
indicator light will flash red/green automatically.
Pairing with smartphone
• Make sure the soundpods are switched off before entering pairing mode.
• Press and hold both multi-function buttons for about 4 seconds. The soundpods
will be search for a BT connection. You will hear
indicator light will flash red/green automatically.
• Turn on the BT settings on your smartphone and wait until Prozis Airia appears in the
list of BT devices found.
• Select Prozis Airia and wait until the soundpods are listed as connected in the BT
settings of your smartphone. Enter
• Once the connection has been established, you will hear
• If the connection attempt takes longer than 3 minutes to complete, the soundpods
will switch off automatically.
Pairing with computer or other devices
• You should use a BT adapter if your computer does not support a BT connection.
• Plug the BT adapter into the computer's USB port and make sure the BT function of
the adapter is activated.
• Make sure the soundpods are off before initiating pairing mode.
• Press and hold both multi-function buttons for about 4 seconds. The soundpods will
search for a BT connection.
• Open the BT software installed in your computer and select "Search for BT devices"
(check the BT software user manual if needed) and wait until Prozis Airia appears in
the list of BT devices found.
• Select Prozis Airia and wait until the soundpods are listed as connected in your
computer's BT settings. The LED indicator light will flash red/green automatically.
• Switch on the media player to play music, watch TV or movies, or play games.
6
message and the green indicator light will
and the LED
Pairing mode
if a PIN code is requested.
0000
BT connected
Subsequent pairing
The soundpods switch on automatically when you take them out from the charging
case, or you can also switch them on manually by pressing and holding both of the
multi-function buttons for 2 seconds.
After 20 seconds, the soundpods will automatically start pairing with the last paired
device.
Clear the paired device list stored in the soundpods
• Place the soundpods inside the case.
• Short press both multifunction buttons simultaneously and then press and hold
them until the indicator light flashes yellow.
• The indicator light will then change to red automatically, indicating the list of paired
devices has been cleared.
PHONE CALL FUNCTIONS
Answering a call
A beeping sound is played when receiving a call. To answer an incoming call, press
the multi-function button once. You can use the soundpods as speakerphones.
Rejecting a call
To reject a call, press and hold the multi-function button for about 2 seconds. An audio
sound is played when you reject a call.
Ending a call
To end a call, press the multi-function button once.
AUDIO PLAYBACK FUNCTIONS
.
Play/Pause
To pause, press the multi-function button once. To resume playing, press the button
once again.
Next/previous track
To move to the next track, press the right multi-function button twice quickly.
To move to the previous track, press the left multi-function button twice quickly.
EN
7