Maintenance; Air Filter; Fuel Filter - Timberpro M2600-3 Manual Del Propietário

8. Maintenance

System/components
fuel leaks, fuel spillage
fuel tank, air filter, fuel filter
idle adjusting screw
spark plug
cylinder fins, intake air cooling vent clean
muffler, spark arrester, cylinder exhaust port clean
throttle trigger, stop switch
cutting parts
transmission
screws/nuts/bolts
cutting attachment guard
oiling port
guide bar
sprocket
saw chain
WARNING
• Make sure that the engine has stopped and is cool
before performing any service to the machine. Con-
tact with moving cutting head or hot muffler may
result in a personal injury.

AIR FILTER

• The air filter, if clogged, will reduce the engine perfor-
mance. Check and clean the filter element in warm,
soapy water as required. Dry completely before in-
stalling. If the element is broken or shrunk, replace
with a new one.
(1)
(1) Air filter
Before
Procedure
wipe out
inspect/clean
see adjusting
idling speed (p. 22)
clean and readjust
plug gap
check operation
r eplace if
something's wrong
grease
tighten/replace
make sure to attach
clean
clean
inspect/replace
inspect/sharp
GB 21
Every Every Every
25 50 100
hours hours hours
use
after after after
✔
✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔
✔
✔
✔
✔

FUEL FILTER

• When the engine runs short of fuel supply, check the
fuel cap and the fuel filter for blockage.
(1)
(1) Fuel filter
Note
replace, if necessary
replace carburetor
if necessary
GAP: .025 in (0.6 ~ 0.7 mm)
replace, if necessary
not adjusting screws