Warranty Conditions - Schellenberg STA Slide 400 Manual De Instrucciones

CHECK BEFORE THE INSTALLATION
To ensure the necessary security and the smooth operation of the actuators, the following preconditions must be
checked:
– The gate must be suitable for the actuator system. It must especially be ensured that it is suffi ciently strong and rigid. For metal
gate leafs we recommend establishing the connection to the actuators with screws. For wooden gates the fi xing screws must be
fully supported on the inside and outside with metal plates, since otherwise the screws could loosen over time.
– The dimensions and weights must match the specifi cations of the technical properties.
– Check for the smooth and uniform movement of the leafs and make sure that there is no friction or obstructions during the entire
movement.
– Mechanical stops for the positions "Gate OPEN" and „"Gate CLOSED" must be present.
– If necessary, remove any present locks and stoppers.
AFTER THE INSTALLATION
– There is an increased risk of injury in the immediate vicinity of the posts. .
– The movement of the leafs should not be counteracted deliberately.
– Branches and shrubs may not interfere with the operation of the automatic gate system.
– The systems of the indicator light display should always be functional and clearly visible.
– The leafs should only be moved manually after the disengagement/release has been performed. – In the event of malfunctions, the leafs must be disengaged/released to allow a passage. It should be waited until qualifi ed
personnel is available for technical assistance.
– We recommend performing an operating capability test of the gate system, security devices and accessory equipment at
least once every six months through qualifi ed personnel.

WARRANTY CONDITIONS

– Excluded from the warranty are damages that are caused by:
- use-related, normal wear, improper installation, connection, operation or treatment
- acts of God or other external infl uences
- improper maintenance or repair by third parties
- technical alterations by third parties
– In case of a warranty case we will repair the product at our discretion, or exchange it for an equivalent SCHELLENBERG
product.
– Replacement or repair of the unit will not extend the warranty period.
– A condition for a warranty claim processing is the presentation of a copy of the original sales receipt. When shipping the
units please include a copy of the original sales receipt and a description of the defect.
– The warranty period can be obtained from the technical data
Unit shipment to:
Alfred Schellenberg GmbH
Consumer Service Department
An den Weiden 31 D-57078 Siegen
[email protected]
10