Electric Components - Kärcher FC 3 Cordless Manual De Instrucciones

ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.

Electric components

DANGER
 Do not immerse the device
into water.
 Check the faultless condition
of the appliance and the ac-
cessories before using it.
Otherwise, the appliance
must not be used.
 Immediately replace the
charger with the charging ca-
ble in case of visible damage.
 Turn off the appliance and re-
move the mains plug prior to
any care and maintenance
work.
 Repair works may only be
performed by the authorized
customer service.
 The appliance contains elec-
trical components - do not
clean under running water.
 Do not insert conductive ob-
jects (such as screwdrivers or
the like) into the charging
socket.
 Do not touch contacts or
wires.
 The voltage indicated on the
type plate must correspond to
the supply voltage.
 Do not scrape the power cord
across sharp edges and en-
sure that it does not get
pressed.
16
WARNING
 The appliance may only be
connected to an electric sup-
ply that has been installed by
an electrician in accordance
with IEC 60364.
 The appliance may only be
connected to alternating cur-
rent. The voltage must corre-
spond with the type plate of
the appliance.
 For safety reasons, we rec-
ommend that you operate the
appliance only via a earth-
leakage circuit breaker (max.
30 mA).
DANGER
Risk of electric shock.
 Never touch the mains plug
and the socket with wet
hands.
 Do not use the charger if dirty
or wet.
 Do not operate the charger in
explosive environment.
 Do not carry the charger by
holding the mains cable.
 Store and use the charger in
dry rooms only.
 Protect the mains cable
against heat, sharp edges, oil
and moving parts of the ma-
chine.
 Avoid using extension wires
with multiple sockets and si-
multaneous operation of mul-
tiple devices.
 Do not pull the plug from the
socket by pulling the mains
cable.
– 7
EN
Charger