RS Pro RS-128M Manual De Instrucciones página 4

Pinless Moisture Meter/ English
The WET value can adjust 50 to 100. The default value
is 60.
8.Backlighting
Press UP the button to switch the backlighting on or
off when the meter is in the data hold mode.
The display will be backlit with a series of white LEDs.
Moisture Table of Comparison
Construction Material Display(Unit)
<30
Gypsum 30~60
>60
<25
Cement 25~50
>50
<50
Wood 50~80
>80
Note:
• lf the ball head is in the corner, it maintains a
minmum distance of 8 to10cm from corner area.
• The ball head must be kept perpendicular to the
measured material during the measurement and pressed
firmly against the surface and not slanted.
• ln the case of mate rial thicknesses of less than
20cm,
• lf"BAT" appears in the display, the battery should
be there is the danger that moisture values maybe in
correct.
4
Moisture Status
Dry
Risk
Wet
Dry
Risk
Wet
Dry
Risk
Wet
01/12/2017 Version No. 001
Manuel d'instructions
RS-128M
No d'inventaire: 146-9082
Humidimètre sans l'épingle
FR