Idiomas disponibles
Idiomas disponibles
• Keep the buttons pressed down and then pull out the hose.
• Please attach the telescopic suction tube to the grip end (see section
" Suction Tube").
• Then assemble the floor nozzle and/or the accessories.
* Using the Appliance
•
Unwind the length of cable (2) you require.
•
Insert the mains plug into a correctly installed 230 V, 50 Hz power socket. Turn
•
on the device with the on/off switch (1) by pushing the regulator downwards.
•
Adjust the suction power by turning the suction power regulator (6).
•
Vacuum at a steady speed. There is no need to exert pressure.
•
Attention: pay attention to the range that can be covered with the cable length.
* Vacuum power regulator
Low vacuum power: For curtains and delicate fabrics
Medium vacuum power: For long-pile carpets and textile flooring
High vacuum power: For sturdy rugs and floors
* Telescopic Suction Tube:
This makes it possible to adapt the height to your individual body size. Unlock the coupling by turning the wide
o
section of the suction tube to the left.
Move the suction tube as required. To lock the coupling, turn the wide suction tube to the right.
o
GB
* Overview the components
1.On/off switch
2.Cable & Plug
3.Filter cover - Outlet filter
4.Carrying handle
5.Cable-winding key
6.Vacuum power regulator
7.Dust bag filling display
8.Handle for opening the dust bag compartment
(front cover)
9.Hose connection
10.Big wheel
"2-in-1" nozzle
(groove and brush nozzle)
* Cable winding device:
Pull out the cable (1) up to the maximum length indicated with the yellow mark.
Never pull the cable out up to the red mark as the cable winding can be damaged.
Said damages are not covered by the warranty.
Winding
Press the cable (5) winding button and guide the cable. Hold the cable to avoid wrapping.
Nozzle Attachment:
Crevice nozzle/
Brush nozzle: For vacuuming upholstery, curtains and in corners and crevices etc.
"2-in-1" nozzle: When this is folded together it can be used as a groove nozzle. If you would like to use the brush nozzle,
pull the brush section in the direction of the arrow until it locks in place.
Floor nozzle: To clean carpets or smooth surfaces.
Smooth floors: Press down the lever with the brush symbol with your foot. The brush is now visible.
Carpets: Press down the opposite lever.
Releasing the nozzles: Pull these off while turning slightly.
* Air Slide:
Open the air slide on the hose handle in order to regulate the airflow or to clear any particles sticking to the nozzle.
* Dust bag replacement display (7):
Hold the hose up into air. If the dust bag change display lights up, the bag is full. Please change it.
* Changing the dust bag:
