Protecting The Environment; Ec Declaration Of Conformity - Stanley FATMAX FME301 Manual De Instrucciones

Hints for optimum use
Always use the appropriate type of saw blade for the
u
workpiece material and type of cut.
Always hold the tool with both hands.
u
Let the blade run freely for a few seconds before starting
u
the cut.
Apply only a gentle pressure to the tool while performing
u
the cut.
Work with the shoe pressed against the workpiece.
u
As some splintering along the line of cut on the top side of
u
the workpiece cannot be avoided, cut on the side where
splintering is acceptable.
Where splintering is to be minimised, e.g. when cutting
u
laminates, clamp a piece of plywood onto the top of the
workpiece.
Support large panels to minimize the risk of blade pinching
u
and kickback. Large panels tend to sag under their own
weight.
Supports must be placed under the panel on both sides,
u
near the line of cut and near the edge of the panel being
cut.
Never hold piece being cut in your hands or across your
u
leg.
Secure the workpiece to a stable platform using clamps. It
u
is important to support the work properly to minimize body
exposure, blade binding, or loss of control.
Maintenance
Your Stanley FatMax corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
(Original instructions)
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
Technical data
Input voltage V
Power input
W
No-load speed
Min
Max. depth of cut mm
Blade diameter mm
Blade bore mm
Blade tip width
mm
Weight
kg
Level of sound pressure according to EN 60745:
Sound pressure (L ) 89,0 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 100 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a ) 2.6 m/s
h,w

EC declaration of conformity

%
MACHINERY DIRECTIVE
FME301 - Circular saw
ENGLISH
FME301
Ac
-1
3.9 (4.31 with blade)
, uncertainty (K) 1.5 m/s (cutting wood)
2 2
230
1650
5500
66
190
16
1.8
7