Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stanley Fat Max product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and
packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Stanley Europe provides a facility for the collection and
recycling of Stanley Fat Max products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe office at the
address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Stanley Fat Max batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
Run the battery down completely, then remove it from the
u
tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
u
to any authorised repair agent or a local recycling station.
8
(Original instructions)
Technical data
Input voltage
No-load speed
Stroke length
Weight
Charger
Input Voltage
Output Voltage
Current
Approx. charge time
Battery
FMC685L
Voltage
V
18
DC
Capacity
Ah
1.5
Type
Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L
) 84.5 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 95.5 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Cutting chipboard (a
) 18.0 m/s
, uncertainty (K) 1.5 m/s
2
h, B
Cutting wooden beams (a
) 13.3 m/s
h, WB
FMC675 (H1)
V
18
dc
min
-1
0-3000
mm
25.4
kg
2.054
905765**
906086**
typ. 1
typ. 1
V
230
230
AC
V
20
18
DC
A
2
2
45 - 120
45 - 120
min
FMC687L
FMC688L
18
18
2.0
4.0
Li-Ion
Li-Ion
2
, uncertainty (K) 1.5 m/s
2
2
Tabla de contenido
