Fcc Statement - Samsung SCC-B539X Guía De Usuario

Ocultar thumbs Ver también para SCC-B539X:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

9.
If this product fails to operate normally,
contact the nearest service center. Never
disassemble or modify this product
in any way. (SAMSUNG is not liable
for problems caused by unauthorized
modifications or attempted repair.)
10. When cleaning, do not spray water
directly onto parts of the product. Doing
so may cause fire or electric shock.
CAUTION
1.
Do not drop objects on the product or
apply strong shock to it. Keep away from
a location subject to excessive vibration
or magnetic interference.
2.
Do not install in a location subject to
high temperature (over 122°F, 50°C),
low temperature (below 14°F, -10°C), or
high humidity. Doing so may cause fire
or electric shock.
3.
If you want to relocate the already
installed product, be sure to turn off the
power and then move or reinstall it.
4.
Remove the power plug from the
outlet when then there is a lightning.
Neglecting to do so may cause fire or
damage to the product.
5.
Keep out of direct sunlight and heat
radiation sources. It may cause fire.
6.
Install it in a place with good ventilation.
7.
Avoid aiming the camera directly towards
extremely bright objects such as sun, as
this may damage the CCD image sensor.
8.
Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
9.
The Mains plug is used as a disconnect
device and shall stay readily operable at
any time.

FCC Statement

This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful
interference, and
2) This device must accept any interference
received including interference that may
cause undesired operation.
Note
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
IC Compliance Notice
This Class A digital apparatus meets
all requirements of the Canadian
interference-Causing Equipment
Regulations of ICES-003.
3
Tabla de contenido
loading

Tabla de contenido