Secret Code Setting And Remote Monitor Function - Daewoo DTC-400 Manual De Instrucciones

 Setting Alarm Clock
1. In on-hook state, press ALARM key once, LCD displays 12-00 AL1,
2. Press UP or DOWN key to select ON or OFF. LCD displays "ALM" icon when the
alarm is set to ON.
3. Press SET key, value "12" starts to fl ash.
4. Press UP or DOWN key to set the alarm hour and press SET key to confi rm and
enter alarm minute setting.
5. Press UP or DOWN key to edit alarm minute and press SET key to confi rm and go
to next group alarm clock setting.
6. Repeat the above steps to set additional alarms.
NOTE: The fi rst 3 groups alarm clock will be repeated periodically every day while the
last 2 group alarm clock is eff ected one time.

SECRET CODE SETTING AND REMOTE MONITOR FUNCTION

 Setting
1. In on-hook state, press and hold RING key for 3 seconds, LCD displays Pin ----.
2. Input a 4-digit of PIN using the numeric keys.
3. Press DEL to edit the secret code, press SET to confi rm.
4. When the last digit of the secret code is #, the telephone will activate remote
monitor function.
5. Set the ringer to OFF. (Please refer to section "SETTING RINGING TONE").
 Usage
1. Secret code: When caller call this telephone, he/she will hear the usual ringing
tone (when the line gets through) three times or four times. However, the
telephone unit will not ring. The caller will hear a short "di" sound, which means
that the caller need to key in the secret code. Once the caller keys in the correct
code, the telephone unit will ring. Press SPEAKER key or pick up the handset to have
the conversation with the caller.
2. Remote monitor: If the last digit of the secret code is #, after the caller keys in the
correct secret code, the telephone unit will go into handsfree mode automatically.
3. If the caller keys in the wrong code, he/she will have to call again and key in the
correct secret code PIN.
NOTE: This function is useful only when the telephone ringing is set to OFF. The caller
must know the secret code in order to dial through the line.
R CALL TRANSFER FUNCTION
To transfer a call during a conversation to another phone number, press R key and
dial the desired destination number. When you here tone signal return the handset
to the base to fi nish the call transfer.
BABYCALL FUNCTION
At on-hook state, press and hold REDIAL key for 3 seconds to come into baby call
function setting. LCD displays BABYCALL OFF, press REDIAL key to set it ON, press
ENG
18