Our sweeping «Trizone» brush head can be used with all common
brushing techniques.
Oral-B TriZone brush head
features triple zone cleaning action for outstanding plaque
removal, even in between teeth.
Oral-B brush heads feature light blue INDICATOR
monitor brush head replacement need. With thorough brushing, twice a day
for two minutes, the blue color will fade halfway approximately within 3
months, indicating the need to exchange your brush head. If the bristles
splay before the color recedes, you may exert too much pressure on teeth
and gums.
We do not recommend using the Oral-B «FlossAction» or Oral-B «3D White»
brush head with braces. You may use the Oral-B «Ortho» brush head,
specifically designed to clean around braces and wires.
Synchronizing your Toothbrush
To avoid interference of display messages when using more than one
Oral-B toothbrush with radio transmission and SmartGuide in the same
household, you need to assign the handles to their respective SmartGuide.
You can synchronize a maximum of 2 handles with one SmartGuide.
To do so, push the «h/min» button in the battery compartment for at least
3 seconds. The SmartGuide shows «L---». Turn on your handle to start the
synchronization process. It is finished when «L-1-» is displayed. Turn off the
handle. To assign a second handle to the same SmartGuide turn on the
other handle until «L-2-» is displayed. After having synchronized the second
handle, «Full» will be displayed. Exit the synchronization mode by pressing
the «h/min» or «set» button, otherwise it will end automatically after 30
seconds.
Cleaning recommendations
After brushing, rinse your brush head under running water with the handle
switched on. Switch off and remove the brush head. Clean handle and brush
24
®
bristles to help you