Operation (English) - Saurer Melco 110348-01 Manual Del Usuario

Operation
1. Operation
The Bobbin Winder is available as a stand-alone
option (see Figure 1-1). The operation of the
Bobbin Winder follows.
Thread Selection
Although all standard embroidery threads may
be used as an under or bobbin thread, embroi-
dery results vary depending on the thread weight
and composition selected. Thin, weak threads
will increase thread breakage problems.
Conversely, thick, slick-finish threads may pro-
duce problems with the stitch quality of finished
embroidery. Bobbin tension requires adjustment
for good embroidery with any thread. The
weight of the thread selected and the tension
used when winding will also determine the amount of thread on the bobbin and therefore the
frequency of bobbin changes. For most applications, a cotton thread or a core spun cotton com-
position thread (such as RASANT) in a 40 or 50 weight (DTEX numbers 135x2 and 128x2 respec-
tively) is recommended.
Operation
1. Thread the winder as shown in Figure 1-2.
110348-01 Rev. A
Route thread around the bobbin
case in the direction shown.
Figure 1-1
Figure 1-2
1-1
1. Operation