SICK PBS Manual De Instrucciones página 25

Operating Instructions
Mechanical connection
When mounting the instrument, ensure that the sealing faces of the instrument and the
„
measuring point are clean and undamaged.
Screw in or unscrew the instrument only via the flats using a suitable tool and the
„
prescribed torque. The appropriate torque depends on the dimension of the pressure
connection and on the sealing element used (shape/material). Do not use the case as
working surface for screwing in or unscrewing the instrument.
When screwing the transmitter in, ensure that the threads are not jammed.
„
The blue cap of the sensor housing can be twisted up to 330° on the stainless steel
„
housing until it can turn no more. Do not overtwist the cap.
With a flush-mounted process connection, remove the protective cap shortly before moun-
„
ting. Ensure that the membrane is not damaged during installation.
8013154/UP90/2015-03-30
7. Starting, operation
Product label (example)
© SICK AG • Germany • All rights reserved • Subject to change without notice
Part-No.
Serial-No.
PBS
25