Metrological Information; Start-Up; Setting Up The Vectron Sc25/Sc50; Notes On Set-Up Of The Vectron Sc25/Sc50 - Bosche VECTRON SC25 Avisos De Seguridad Y De Instalacion

5. Metrological information

The scale Vectron SC25/SC50 bears the appropriate conformity mark and the
metrology mark on the type plate below the stainless steel cover.

6. Start-up

6.1. Setting up the Vectron SC25/SC50

6.1.1. Notes on set-up of the Vectron SC25/SC50
Damage to the measuring mechanism due to continuous load
A Load the weighing plate only for the duration of the weighing process.
Damage to the Vectron SC25/SC50 due to overload
A Avoid jolting or overloading the balance above the specified maximum load less any
existing tare load.
i
Place the goods in the middle of the platform. They should not exceed
the platform size.
X The Vectron SC25/SC50 may only be used in a dry environment. Avoid high
humidity, which could cause condensation. Avoid direct contact with water. Do
not spray or immerse the scale in water.
X The surface of the SC25/SC50 must be able to safely support the weight of the
weighing platform under maximum load at the support points.
X Place the SC25/SC50 on a stable, even and sufficiently large surface. Ensure
that the surface is stable enough to prevent vibration during weighing. Choose
© Vectron Systems AG | Current as of 10/20 | Subject to error and technical modification.
A NOTICE
29