Care And Cleaning - Kohler K-1025-H2 Guia Del Usuario

Sistema de hidromasaje personal de 8 jets
Ocultar thumbs Ver también para K-1025-H2:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Operation
Please read and follow these steps carefully so you can safely enjoy the benefits of your hydro-massage
system.
Before Use
Remove all loose bathing items (such as soap bars, shampoo bottles and washcloths) from the direct
water path.
Remove your eyeglasses or contact lenses and any loose jewelry before entering the enclosure.
Operation
WARNING: Risk of personal injury. Always stand off to the side of the bodyjets when you turn on
the hydro-massage system. The stream of water can be very powerful.
NOTE: Do not allow shampoo, soap, or bubble bath to the enter the foot bath basin. If desired, shower
using shampoo and soap before filling the footbath basin with water.
Close the enclosure door securely.
Fill the foot bath basin with tempered water (not to exceed 104°F (40°C)) to a level at least 3" (7.6
cm) above the top of the suction cover. Use your hand to check the water temperature in the basin
before activating hydro-massage system.
Press the power icon on the lighted user keypad to turn the hydro-massage system on. After several
seconds, water will begin flowing at the lowest water pressure setting.
Allow the water to flow for several seconds to regulate the water temperature, then enter the foot
bath basin.
Gradually increase the water flow by pressing the up arrow on the lighted user keypad.
NOTE: After 20 minutes of continuous use, the hydro-massage system will automatically shut off. To
reactivate the system, step to the side, then press the power icon on the lighted user keypad. Reenter the
basin area.
If you wish to use the hydro-massage system after it has automatically shut down, simply step to
the side and press the power icon on the keypad to restart the system.

Care and Cleaning

Flush Hydro-Massage System
NOTE: Sanitize your system by flushing it twice a month or more, depending upon usage. To do this:
• Fill the footbath basin with hot water to a level 3" (7.6 cm) above the top of the suction cover.
Kohler Co.
Suction
Cover
5
Tower With
Bodyjets
Keypad
Foot Bath
Basin
1032110-5-D
Tabla de contenido
loading

Este manual también es adecuado para:

K-1035-h2K-1036-h2

Tabla de contenido