6
Next, find the centerline at the front of the
front glass. Mark centerline with a grease pen-
cil outside the recently cleaned area. Also lo-
cate and mark the center of the top side of the
film strip to be applied to the front panel.
7
Apply the front piece of film as flat as possible,
aligning center marks to start the process.
IMPORTANT: Make sure the front piece of
film completely overlaps the two previously in-
stalled side pieces of film. Refer to adjacent
photo.
F = front
R = rear.
8
Work out as many imperfections as possible
that could cause air to peel film. Do this by us-
ing your finger to work all trapped air pockets
towards edges and allowing the air to properly
escape.
F
R
5