Ghibli T1 Uso Y Mantenimiento página 16

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
EN
IT
Positioning device on the shoulders
-
Lift the unit and place it on your shoul-
ders.
-
Adjust the shoulder straps (21 Fig.14)
with the help of the buckles (22 Fig.14).
-
Adjust the belt (23 Fig.14) using the buck-
le (24 Fig.14).
NOTE:
On the belt (23 Fig.14) are positioned elastic
tapes (25 Fig.14) which serve for the posi-
tioning of accessories such as the dusting
brush, for tight spaces, etc...
USE OF EQUIPMENT
Start-up of equipment
-
Insert the plug (26 Fig.15) in the socket
(230V model only).
-
Press the switch (27 Fig.16) to "I" (the
lamp lights switch only for the 230V mod-
el).
NOTE:
You can adjust the suction force acting on
the switch (28 Fig.17), positioned on the er-
gonomic handle (10 Fig.17).
Opening the window (29 Fig.17) lowers the
suction force.
For the 24 V device, PLEASE NOTE:
For a greater autonomy of the battery you
must stop the power supply during transfers.
Shutdown of the unit
-
Press the switch (27 Fig.16) to turn off the
device (switch off the lamp, 230V model
only).
-
Remove the plug (26 Fig.15) from the
outlet (230 V model only).
Charging the battery
If during use the devices switches off, it is
necessary to recharge the batteries, acting
as follows:
-
Check if the switch (27 Fig.16) is on posi-
tion "0".
NOTE:
You cannot charge the batteries while the
device is on; there is a safety device which
stops automatically the machine if you con-
nect the charger to the battery.
NOTE:
You can charge the batteries even though
they aren't fully discharged without affecting
the battery life.
-
It is possible to connect directly the cable
(13 Fig. 18) on the battery pack (14 Fig.
18) still mounted on the unit, or remove
the battery pack (14 Fig. 19) by moving
the safety lever (6 Fig.13), pressing the
release button (30 Fig. 19) and lifting the
battery pack (14 Fig. 19) and then remo-
ve it towards
outside.
-
Connect the charger as described in the
section "First battery charge".
-
After charging the batteries, put them
back as described above.
NOTE:
Do not store the device after use, with the
battery discharged. If necessary, recharge
the battery.
For long storage periods of the device and
battery, periodically check the battery charge
status (15/30 days).
EN - 8
Tabla de contenido
loading

Este manual también es adecuado para:

W1T1/bcW1/bc

Tabla de contenido