Technical Specifications - urmet domus folio 1706 Manual De Instalación

FUNCTION
FLOOR CALL FUNCTION
The indoor station is equipped with a pair of terminals (CP) for connecting the fl oor call button. The indoor
station will ring with the set tone for 3s when the button is pressed. Connect this button to indoor station 0
only if there are several indoor stations in parallel. Indoor stations 0 and 1 will ring immediately. Stations 2
and 3 will ring immediately after.
ADDITIONAL RINGER MANAGEMENT
The indoor station is equipped with a pair of terminals (S-, S+) for connecting a supplementary ringer or a
relay. This ringer is controlled when any call tone is generated.
MASTER DOOR UNIT OPEN DOOR FUNCTION
The video door phones can monitor physical state of the 'Master' door by connecting a sensor to the SP/GND
terminals. A red icon will appear on the side of the display when the door is open.
For instructions on:
• Direct functions: door lock, audio, mute, staircase light, auto-on, switchboard calls, indicating LED.
• Menu functions: audio and video adjustments, call tone selection and adjustment, video door phone
answering service, keypad light colour selection, intercom calls, etc.
Refer to the specifi c instruction manual attached to the product and which must be given to the end user.
FLUSH-MOUNTING BOX FASTENING PROCEDURE
At the end of the programming procedure, fasten the video door phone to the fl ush-mounting body by means
of the four screws provided.
Clip the frontal panel onto the support.
Remove the protective fi lm.
10

TECHNICAL SPECIFICATIONS

Power voltage on Line terminals:
Draw on Line terminals:
Display:
Resolution:
Brightness:
Horizontal viewing angle:
Vertical viewing angle:
Working temperature range:
DS1703-007 DS1703-007
±30Vdc max
450mA max
3,5" TFT
320 H x 240V (RGB dot)
2
>250cd/m
+60° ÷ -60°
+50° ÷ -55°
-5 ÷ + 45° C
11