Beko DV 1160 Manual Del Usuario página 14

6
Solution suggestions for problems
Problem Cause
Drying process
Cover filter and filter drawer might have
takes too much
not been cleaned.
time.
* Cover filter and filter drawer might have
Laundry come out
not been cleaned.
wet at the end of
* Excessive laundry might have been
drying.
loaded in.
* It might have not been plugged in.
* The loading door may be ajar.
Machine does not * Programme might have not been set or
switch on or the the "Start/Pause/Cancel" button might
programme does have not been pressed.
not start. Machine is * "Childproof lock" might have been
not activated when activated.
set. * The condenser cover on the models
with a condenser might not be closed
securely.
Programme has
* The loading door may be ajar.
been interrupted
* Electricity may be cut off.
without any cause.
Laundry has shrunk,
* A programme suitable for the laundry
become felted or
type might have not been used.
deteriorated.
Drum lightning does
not come on. * The machine might have not been
(for models started by using the On/Off button.
equipped with a * Bulb may have blown.
lamp)
"Final / Anti- * The 2-hour anti creasing programme
creasing" LED to prevent laundry from creasing might
flashes. have been activated.
"Final / Anti-
* Program has come to an end.
creasing" LED is on.
* A heat sensor failure has occurred.
The "Drying" LED
Machine ends the programme without
flashes.
heating.
"Filter cleaning" LED
* Filter might have not been cleaned.
flashes.
Also for products equipped with a condenser
* Water may be full.
"Water tank"
* Anti-creasing programme might be
warning LED is on.
running.
"Condenser * Filter drawer/Condenser might have
cleaning" LED is on. not been cleaned.
A
Call an authorized service agent if the problem persists.
Explanation / Suggestion
* Clean the cover filter and Filter drawer.
* Clean the cover filter and Filter drawer.
* Do not overload the machine.
* Make sure that the machine is plugged in.
* Make sure that the loading door is properly
closed.
* Make sure that the programme has been set
and it is not in "Pause" mode.
* Deactivate the childproof lock.
* Make sure that the condenser cover and the
red lock is closed securely.
* Make sure that the loading door is properly
closed.
* Press "Start/Pause/Cancel" button to start
the programme.
* Dry only the laundry which is suitable for
drying in your machine after checking the
labels on your clothes.
* Select a programme with suitable low
temperature for the laundry type to dry your
clothes.
* Make sure that the machine is On.
* Call the authorized service to replace the
bulb.
* Turn off the machine and take out the
laundry.
* Turn off the machine and take out the
laundry.
* Turn off the machine and take out the
laundry. Call your authorized service.
* Clean the cover filter.
* Drain the water in the water tank.
* Clean the filters in the condenser/filter drawer
under the kick plate.
14 - EN