Tabla de contenido
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
ADDITIONAL SAFETY RULES
Ensure the mains voltage matches the voltage on the tool rating plate.
Do not use the mixer drill in environment with potentially explosive atmosphere. Do not mix solvents or
substances that contain solvents with ignition temperature below 210
Do not wind the power cord around any part of the mixer drill body.
Switch the mixer drill on and off only when the mixer paddle is immersed in a container.
Ensure the container for mixing is properly fixed.
Do not put your hands or any other objects into the container when mixing.
Use additional handles supplied with the device. Loss of control may cause operator personal injury.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of injuries at work.
CONSTRUCTION AND USE
Mixer drill is a power tool designed for continuous use for building industry and other fields. It is driven by
single-phase commutator motor with rotational speed reduced with gear transmission. This type of power
tools is widely used for making holes in wood, wood-based materials and metal, and mixing substances. Possibility
to use various mixing tools appropriate for type of mixed substances allows for mixing of cement, gypsum,
stucco, paint, plaster, self levelling underlayment and other chemicals. Depending on the composition
being mixed and type of the tool used it is not recommended to mix more than 65 litres of the product at
once. Range of use covers repair and building works, woodworking and any work from the scope of individual,
amateur activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1.
Drill chuck
2.
Additional handle
3.
Switch
4.
Switch lock button
5.
Depth gauge rod
6.
Spindle
7.
Reducer sleeve
8.
Additional handle
9.
Carbon brush cover
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
MIXER DRILL
58G605
DETAILED SAFETY REGULATIONS
11
11
0
C.
Tabla de contenido
