Emotron VSC 48-009 Serie Guia De Inicio Rapido página 68

Function
Description
Code no.
Stop Mode
5-08
Using MFIT
Step of Up/
5-09 Down
Function (Hz)
Encoder
5-10
Impulse Ratio
Switch the
source of fre-
5-11
quency com-
mand
AI2 function
5-12
selection
Notes:
1. To switch to Run/Stop with Function 1-01 = 0001.
2. To switch to Forward/Reverse with Function 1-01 = 0001.
3. Preset Speed #3 is obtained by activating Terms. S3 and S4 simultaneously.
Emotron AB 01-3990-11r3
Range/Code
0000: When the MFITs are
Programmed for Up/Down Frequency
Control, the Set Frequency will remain
when the Drive stops. And when the
Drive stops, Up/Down Function is
disabled.
0001: Up/Down is used. The preset
frequency is reset to 0 Hz as the VSD
stops.
0002: When the MFITs are
Programmed for Up/Down Frequency
Control, the Set Frequency will remain
when the Drive stops. And when the
Drive stops, Up/Down Function is
enabled. *7
0.00 to 5.00
0.001 to 9.999
0=refer to 6-00
1= VR on keypad
2=AIN on control terminal TM2
3=Up/Down on TM2
4= reference via serial communication
0020 PID feedback
0021 Bias Signal 1 input
0022 Bias Signal 2 input
Factory Re-
setting marks
0000
0.00
1.000 V2.3
0 V2.3
0020
Software index 67