English; Introduction - Emotron VSC 48-009 Serie Guia De Inicio Rapido

ENGLISH

Introduction

This guide is to assist in installing and running the variable speed drive, VSD, to
verify that the drive and motor are working properly. Starting, stopping and
speed control will be from the keypad. If your application requires external con-
trol or special system programming, consult the VSC Instruction Manual in
CD-ROM format supplied with your VSD.
Step 0 Delivery of the Drive
Emotron's VSDs all pass the function test before delivery. Please check the fol-
lowing when you receive and unpack the VSD:
• The model and capacity of the VSD are the same as those specified in your
purchase order.
• Check whether there is any damage caused by transportation. Please do not
switch on, and make sure that you contact Emotron's sales representatives if
any you experience any of the above problems.
Step 1 Before Starting the VSD
• Check VSD and motor nameplates to determine that they have the same
HP and voltage ratings. (Ensure that full load motor amps do not exceed
that of the VSD.)
• Remove the terminal cover to expose the motor and power terminals.
a. Verify that AC power is wired to L1, L2, and L3.
b. Verify that motor leads are connected to T1, T2, and T3.
(The two leads may need to be reversed if motor rotation is not correct.
46 Introduction Emotron AB 01-3990-11r3