Removing/Attaching The Grass Collection Box; Filling Level Indicator; Mulchkit; Lateral Grass Ejection - Deltafox DG-PLM 5125 SP Traducción Del Manual De Instrucciones Original

Cortacésped de gasolina
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 156
GB
Removing/attaching the grass
collection box
Caution: Do not operate the
equipment with the grass collec-
tion box (23) or impact protec-
tion (22) installed incompletely.
Risk of injury
Assemble grass collection box
• Put the plastic straps (29) over
the grass collection box rod (30).
Fixing the Grass Collection Box onto
the Equipment:
Prior to using the grass collection
box (23), the mulch kit (27) and
lateral ejection chute (28) must be
removed.(see
1. Lift the rear impact protection (22).
2. Hold the grass collection
box (23) by the carrying handle.
3. Hang the grass collection
box (23) into the grass collecti-
on box attachment (31) on the
rear of the device.
4. Remove the impact protecti-
on (22); it keeps the grass col-
lection box in place.
Removing/emptying the grass
collection box:
1. Switch off the engine and wait
for the blade to come to a stop.
2. Lift the impact protection (22).
3. Remove the grass collection
box (23) by the carrying handle.
4. Empty the grass collection box
(See chapter "Disposal/
environmental protection").
110
,
).
5. Mount the grass collection box
again.

Filling level indicator

There is a filling level indicator (
on the grass collection box (
filling level indicator only works while the
machine is in operation.
GO
Flap open: grass catcher empty
STOP
Flap closed: grass catcher full
The grass collection box must be
emptied.

Mulchkit

Prior to using the mulch kit (27),
the lateral ejection canal (28) has
to be removed ( see "Lateral grass
ejection"
Attaching mulch kit
1. Remove the gras collection box
(
23) , if used.
2. Lift the impact protection (22).
3. Insert the mulch kit (27) into
the holder and push in the bra-
cket (27a) of the mulch kit (27).
You will hear the bracket (27a)
click into place.
Remove mulch kit
1. Lift the impact protection (22) .
2. Push in the bracket (27a)
3. Remove the mulch kit (27).

Lateral grass ejection

Before using the lateral grass
ejection, the mulch kit (
has to be inserted and the grass
collection box (
removed.
23)
23a). The
).
27)
23) has to be
Tabla de contenido
loading

Tabla de contenido