Range Of 1000 A - Sonel CMP-3000 Manual De Uso

5.1.2 Range of 1000 A

To perform the current measurement:
 set the rotary switch at
 press MODE button to display the following symbol:

, if you are measuring alternating current,

, if you are measuring direct current,
 use the clamp-opening trigger
tested conduit. Only one conduit must be within the testing range
of the clamps,
 read the measurement result on the display.
If DC current is measured and the meter is not attached to
the tested circuit, but it still indicates a non-zero value, then
you must reset it by briefly pressing REL/Hz button.
52
1000A,
CMP-3000 – USER MANUAL
and attach the clamps on the