Memory Of Measurement Results; Troubleshooting - Sonel LMW-100 Manual Del Uso

5.9

Memory of measurement results

The device remembers the results of the last 20 performed meas-
urements. The device automatically saves the results in the memo-
ry:

in single mode - always,

in continuous mode - the last result before switching off the
function,

in the area and volume measurement – final result,

in indirect measurement – final result.
The recording is not performed in the mode of summing up the re-
sults.

To enter the memory browsing mode, press

The results can be scrolled using the buttons

To clear the memory, in memory browsing mode, press and
hold
Error
code
204
▪ The beam reflected to the meter is too
208 ▪ The return time of the beam to the meter
▪ Distance to target is >50 m.
209 The reflected beam is too strong.
252 Meter temperature is too high.
253 Meter temperature is too low.
255
38
and .
6

Troubleshooting

Cause
Calculation error.
weak.
is too long.
Hardware error.
LMW-100 – USER MANUAL
Solution
Repeat the procedure
Place a shield reflecting the laser beam on
the target.
The target is reflecting the beam too hard.
Place a shield reflecting the beam on the
target.
Cool the meter.
Warm up the meter.
Switch the meter off and on several times.
If the error persists, contact the service
center.
.
.