Assembling; Rh780; Rh830; Rh840 - Moretti Mopedia RH780 Manual De Instrucciones

8. ASSEMBLING

8.1 RH780

The product is delivered already assembled. The only elements that need assembly are the
legs. To install the legs, press the locking button on each leg and insert the legs. Fix the
position by locking the button in one of the holes present.

8.2 RH830

The seat and legs of the product are delivered already assembled.
To install the backrest:
• Turn the seat upside down;
• Press the lock buttons on the backrest structure;
• Insert the backrest tubes inside the guides under the seat up to the lock buttons do not
reach the holes present.

8.3 RH840

The product is delivered partially assembled and no tool is required to complete the
assembly. The shower chair consists of the following parts:
• Left side of the frame;
• Right side of the frame;
• Backrest;
• Left and right footrest;
• Seat and seat cover;
• Bucket;
• 4 x C-clip with safety lock;
• 2 x fixing knobs;
• 2 x connecting pipes.
To complete the assembly carry out the following operations:
• Insert the fixing tubes on the left or right side frame, align the holes and insert the
C-clips as shown in Fig.1;
• Connect the newly assembled part to the other side of the frame by using the same two
fixing tubes and two additional C-clips as described in the previous point (Fig.2);
• Insert the backrest inside the holes on the wheelchair frame and fix the backrest using
the two fixing knobs (Fig.3);
• Place the seat on the wheelchair frame and press down to fix its position, then add the
cover (Fig.4);
• Insert the footrests from the side and rotate them to the front until fastening into the
holder;
• Insert the bucket from the rear side of the shower chair by sliding it into the slots
(Fig.5).
Fig.1 Fig.2
5