Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Using the headset
Connecting via an audio cable
1
Headset
Plug the audio cable into the audio jack.
2
Other device
Plug the other end of the audio cable into the audio output jack.
• W hen using the headset to listen to an audio device, lower the volume before you
unplug the audio cable to prevent sudden, loud sound.
• I f the headset is connected to other devices via an audio cable and wireless
connection simultaneously, the headset plays audio from the device connected via
an audio cable.
Connecting to two devices
The headset can connect to a maximum of two Bluetooth-enabled devices at the same time.
When you connect the headset to two devices, the last device you connect is recognised as
the primary device. The other device is recognised as the secondary device.
1
Connect the headset and a device via Bluetooth by using the NFC feature or by
connecting manually.
2
Slide the Power switch upwards and hold it for approximately three seconds to enter
Bluetooth pairing mode.
The first device is saved as the secondary device before it is disconnected.
3
Follow the same connection procedure used for connecting the first device to connect
the headset to another device.
4
Reconnect the headset to the first device.
• W hen two connected devices are simultaneously playing multimedia files, the
audio track that started playing first will be heard on the headset. If you pause
the file that is currently playing, the audio track on the other device will be
automatically heard on the headset.
• T his feature may not be supported on some devices.
English (UK)
12
10
Tabla de contenido
