EN
This product has been manufactured using extracted natural resources and may contain hazardous substances. The
above symbol, when affixed to a product or its packaging, indicates that the product cannot be disposed of as
household waste. It is your responsibility to dispose of such equipment at a WEEE recycling facility. Separate reuse
and recycling of WEEE at the time of disposal helps to conserve natural resources and ensures that the equipment is
recycled in a manner that safeguards public health and the environment.
COMPLIANCE NOTICE: USA
FCC ID: RJE190541
This device is compliant with the requirements of FCC regulation Part 15. Use of the device is subject to the following
two conditions: (1) the device should not cause any unwanted interference, and (2) it should be able to receive all
types of interference, including interference that could cause it to function in a manner other than that intended. Any
changes or modifications that have not been expressly authorised by the conformity manager shall lead to the user's
right to use the device being revoked. Peripheral devices must be connected using interface cables that are sheathed
and earthed. The connector/outlet must be set up in proximity to the equipment and easy to access.
NOTE: This device has been tested and deemed compliant with the authorised limits applicable to a Class B digital
device, as stipulated in FCC regulation Part 15. These limits are intended to offer reasonable protection against
unwanted interference in a residential setup. This product generates, uses and may emit radio energy. If it is not set
up and used according to instructions, it may cause unwanted interference to radio communications. However, there
is no guarantee that the device will not cause interference in the case of a particular setup. Should the product cause
unwanted interference to the reception of radio or television signals (this can be checked by switching the device on
and off ), it is recommended that the user try one or more of the following measures to prevent interference:
• Turn the receiver antenna to face another direction or move it to another location.
• Move the device away from the receiver.
• Connect the device to an outlet on a different circuit to the circuit the receiver is connected to.
• Seek assistance from the retailer or a an experienced radio/television technician.
21
Manuel Utilisation.indd 21
16/10/2014 17:58