SonoSite DICOM Guia Del Usuario página 8

Default Gateway IP address where network
connects to another network. Cannot be between
127.0.0.0 and 127.0.0.8.
Alternate Gateway Alternate location where
network connects to another network. Cannot
be between 127.0.0.0 and 127.0.0.8.
Location configuration (page 2)
Transfer Images Specify when to transfer images
(during or at end of exam).
Network Speed Select Auto or 100BT Full. If you
use a 10BaseT network, select 100BT Full and use
a 100BaseT hub between the ultrasound system and the network.
Unavailable with wireless setup.
Note: Do not select 10BT Full or 10BT Half. These
settings cause system instability.
JPEG Compression Select High, Medium, or Low.
A high compression has a smaller file size but less
detail. See the ultrasound system user guide for
information about the limitations of JPEG format.
Device Read Timeout (sec) How long the system
keeps the network line open when attempting to
receive information.
Device Write Timeout (sec) How long the system
keeps the network line open when attempting
to send information.
Location configuration (page 3)
The information entered in the following fields
must match exactly the information entered in
the router setup. See Setting Up a Wireless Network
for M‐Turbo or S Series Ultrasound System.
Profile Name Name of profile set for this location.
For each wireless location, you can have up to
10 profiles.
Network Name SSID Network Name Service Set
Identifier for the router.
4 Configuring the system for DICOM
Security Policy Security type that authenticates
the network:
• Open No security
• WEP or SHARED WEP The following fields
appear:
• Encryption Encryption key type (64 bit
or 128 bit)
• Key Index WEP key index 1‐4. Network
location where a specific key is stored.
• Key WEP key value used to encrypt data.
• RADIUS Remote Access Dial‐Up User Service
‐ 802.1x Key Exchange.
• WPA or WPA2 Wi‐Fi Protected Access‐
Enterprise. The following fields appear:
• WPA Authentication Verifies network
users through an authentication server. If
you select PSK, the WPA PSK field appears;
enter the WPA PSK used in configuring
the router. (WPA PSK allows use of
manually entered keys or passwords.)
• Encryption Encryption protocol for the
router.
Location configuration (page 4)
Authentication Type Select one of the following:
• EAP-TLS Extensible Authentication
Protocol‐Transport Layer Security. The
following fields appear:
• Client Certificate Select from the list
of client certificates installed on system.
• Private Key One of a pair of keys (public
and private) that is provided only to the
requestor and never shared.
• Private Key Password A unique
combination of letters and/or symbols
that allows user access.