SonoSite DICOM Guia Del Usuario página 14

To display scheduled procedures
The patient data that you import from the
worklist include scheduled procedures.
On the patient information form, select
Procedure.
The following lists appear under Scheduled
Procedures:
• Procedure Scheduled procedures
• Protocol Protocol for the selected
procedure
• Meaning Definition of the selected
procedure
To change the procedure
You can select a procedure different from the
scheduled procedure.
1 On the patient information form, select
Procedure.
2 Under Performed Procedure, select the
desired procedure from the Code list.
The definition of the procedure appears in the
Meaning field.
3 If you want to modify the Code list, select Edit,
and do one of the following:
• Add an item: Fill in the Code, Scheme,
and Meaning fields, and then select Save.
• Delete an item: Select the item, and then
select Delete.
Updating and querying the worklist
The worklist automatically updates if set up for
an automatic worklist query. (See "To configure a
new location or device" on page
configuration (page 1)" on page 6.) You can also
manually update the worklist, and you can query
the worklist server for a matching patient
procedure.
10 Patient data and the worklist
The following table shows the parameters used
for worklist queries. You set these parameters on
the worklist configuration page. See "Worklist
configuration (page 1)" on page 6.
The time of the last query appears below the
worklist.
Query Parameters
Patient data
Date Range
This Device Only
Automatic Query
On/Off
Occurs Every
Start Time
To manually update the worklist
1 On the patient information form, select
Worklist.
2 Select Update.
To perform a manual query
1 On a new patient information form, do any
of the following:
• Fill in any of the following fields for the
2 and "Worklist
X
X
query: Last, First, Middle, Accession
Number, or Patient ID.
The query is on the characters you enter.
For example, Smith returns Smith,
Smithson, Smithy.
X X
X X
X
X
X