Tabla de contenido
6
Cleaning and maintenance
30. Replace the brewing unit
by turning it into the right
position (the outlet tube facing
downwards and to the front),
insert the brewing unit into
the guide grooves and push
it completely into the coffee
machine.
31. Push the coffee grounds
container
appliance and push the outlet
unit into the upper position.
Close the door.
– The descaling program is
complete when the "Descaling
program" function display
goes out.
32. Remove the water tank (7) and
fill it with minimum 1 litre fresh
water. Replace the water tank.
– The coffee machine is now
ready for operation again and
returns to the last selected
coffee mode.
62 / EN
back
into
the
A
6.11 Cleaning the
nozzle of the milk
frother
To clean the the nozzle of the milk
frother, proceed as follows:
1. Push the coffee dispensing unit
(3) into the uppermost position.
2. Open the door with the coffee
outlet unit (3) by pulling it up on
the left side.
Fully Automatic Coffee Maker / User Manual
CAUTION:
Residues of descaler
may cause damage
to the brewing unit
in the long run! It is
imperative that you
rinse the brewing
unit thoroughly af-
ter every descaling
process.
Tabla de contenido
