Power Requirements; Grounding Instructions; Electrical Requirements - Matrix ENDURANCE STEPPER Manual Del Usuario

POWER REQUIREMENTS

CAUTION!
This equipment is for indoor use only. This training equipment is a Class S product designed
for use in a commercial environment such as a fitness facility.
1. Do not use this equipment in any location that is not temperature controlled, such as but
not limited to garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to
comply may void the warranty.
2. It is essential that this equipment is used only indoors in a climate controlled room. If
this equipment has been exposed to colder temperatures or high moisture climates, it
is strongly recommended that the equipment is warmed up to room temperature and
allowed time to dry out before first time use.
3. Never operate this equipment if it has been dropped, damaged, or is not working
properly, has a damaged cord or plug, is located in a damp or wet environment, or has
been immersed in water.

ELECTRICAL REQUIREMENTS

Any alterations to the standard power cord provided could void all warranties of this product.
Units with LED and Premium LED consoles are designed to be self-powered and do not require
an external power supply source to operate. Without an external power supply, the console's
start-up time may be delayed. Add-on TV's and other console accessories require an external
power supply. An external power supply will ensure power is provided to the console at all
times and is required when add-on accessories are used.
For units with an integrated TV (Touch), the TV power requirements are included in the unit.
An RG6 quad shield coaxial cable with 'F Type' compression fittings on each end will need to
be connected to the cardio unit and the video source. Additional power requirements are not
needed for the add-on digital TV.
120 V UNITS
Units require nominal 120 VAC, 50-60 Hz and at least a 15 A circuit with a dedicated neutral and
dedicated ground wires with no more than 4 units per circuit. The electrical outlet must have
a ground connection and have the same configuration as the plug included with the unit. No
adapter should be used with this product.
220-240 V UNITS
Units require nominal 220-240 VAC, 50-60 Hz and at least a 10 A circuit with a dedicated neutral
and dedicated ground wires with no more than 4 units per circuit. The electrical outlet must
have a ground connection and have the same configuration as the plug included with the unit.
No adapter should be used with this product.
ENGLISH

GROUNDING INSTRUCTIONS

The unit must be grounded. If it should malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. The unit is equipped
with a cord having an equipment-grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances. If the user does not follow these grounding instructions,
the user could void the Matrix limited warranty.
ENERGY SAVING / LOW-POWER MODE
All units are configured with the ability to enter into an energy saving / low-power mode when
the unit has not been in use for a specified period of time. Additional time may be required to
fully reactivate this unit once it has entered the low-power mode. This energy saving feature
may be enabled or disabled from within the 'Manager Mode' or 'Engineering Mode.'
ADD-ON DIGITAL TV (LED, PREMIUM LED)
Add-on digital TV's require additional power and must use an external power supply. An RG6
coaxial cable with 'F Type' compression fittings will need to be connected between the video
source and each add-on digital TV unit.
4