Check Weighing; Percent Weighing - Uline OHAUS DEFENDER 5000 XTREME Manual Del Usuario

AVERAGE PIECE WEIGHT (APW)
When the FUNCTION MODE button is
released, CLr.PW Pcs is displayed.
CLEARING A STORED APW
1. Press the YES button to clear the stored APW.
RECALLING A STORED APW
1. Press the NO button to recall the existing APW.
NOTE: Press the FUNCTION
MODE button to temporarily
display the APW value.
2. The display shows the sample size
PUt 10Pcs.
ESTABLISHING A NEW APW
1. Press the NO button to increment
the sample size. Choices are 5, 10,
20, 50 and 100.
2. To establish the APW, place the specified quantity
of samples on the scale and press the FUNCTION
MODE button to capture the weight.
3. APW is displayed shortly followed
by the APW value with the current
unit of measure.
BEGIN COUNTING
1. Place the parts on the scale and
read the count. If a container is
used, be sure to tare the empty
container first.

PERCENT WEIGHING

Use this mode to measure the weight
of a sample as a percentage of a
reference weight.
PAGE 7 OF 30
OPERATION CONTINUED
REFERENCE WEIGHT
When the FUNCTION MODE button is
released, CLr.rEF% is displayed.
CLEARING A STORED REFERENCE WEIGHT
1.
RECALLING A STORED REFERENCE WEIGHT
1.
AP
Pcs
ESTABLISHING A NEW REFERENCE WEIGHT
0.123
kg
The display shows Put.rEF %.
1. To establish the reference weight,
BEGIN PERCENT WEIGHING
1.

CHECK WEIGHING

Use this mode to determine if
the weight of a sample is within
prescribed limits.
CHECK WEIGHING LIMITS
APW
When the FUNCTION MODE button is
Pcs
released, CLr.rEF is displayed.
CLEARING STORED CHECK WEIGHING LIMITS
1.
RECALLING STORED CHECK WEIGHING LIMITS
1.
PErCNt
Press the YES button to clear the stored reference weight.
Press the NO button to recall the existing reference weight.
NOTE: Press the FUNCTION
MODE button to temporarily
display the reference weight.
place the sample on the scale
and press the FUNCTION MODE
button to capture the weight. rEF.
Wt is displayed shortly followed by
the value with the current unit of
measure.
Place the sample on the scale
and read the percent value. If a
container is used, be sure to tare
the empty container first.
Press the YES button to clear the stored limits.
Press the NO button to recall the
stored limits.
NOTE: Press the FUNCTION
MODE button to temporarily
display the under and over
limit values.
CLr.rEF
%
0.123
kg
Put.rEF
%
rEF. t
12.345
kg
. 100.00
%
CHEC
CLr.rEF
kg
110.000
kg
120.000
kg
0615 IH-4595