Uline H-1114 Manual Del Usuario
Ocultar thumbs Ver también para H-1114:
Idiomas disponibles

Idiomas disponibles

H-1114, H-1115
π
H-1116, H-1117
INDUSTRIAL COUNTING
SCALE
For best performance, the scale should be located in
a cool, dry place that is free from excessive air currents,
corrosives, vibration and temperature or humidity
extremes.
WARNING! DO NOT place the scale:
• Next to open windows or doors.
• Near air-conditioning or heating vents.
• Near vibrating, rotating or reciprocating
equipment.
• Near magnetic fields or equipment
generating magnetic fields.
• On an unstable work surface.
• In dusty locations.
• In direct sunlight.
PREPARING TO USE THE SCALE
1.
Put the scale on a firm, level surface to obtain
accurate weight readings.
LEVEL THE SCALE
• Place the scale on a flat, level surface.
• Using the leveling bubble on the left front panel,
adjust the legs under scale until bubble is centered.
PAGE 1 OF 30
1-800-295-5510
uline.com
BEFORE USING THE COUNTING SCALE
ACTIVATE SCALE
Pour le français, consulter le pages 21-30.
2. Adjust the four leveling feet so scale platform is level.
3. Avoid placing scale in direct sunlight or near the
ventilating system exhaust port.
4. Before turning scale on, remove any weight on the
scale platform.
5. Once scale is turned on, it goes through an LCD test
and re-zeros.
6. Please allow scale to warm up 15-20 minutes before use.
7.
When
appears on screen, scale needs
recharging.
8. Place items being weighed in center of the platform
for accurate weighing. Overall dimensions of the
item should not exceed the platform dimensions.
RECHARGEABLE BATTERY
Powered by 115 VAC or rechargeable battery.
Scale operates up to 120 hours on a fully charged
battery. Recharge the battery when the
or every three months when the scale is not being used
for long periods of time.
TURN SCALE ON
• Nothing should be on the scale.
• Press ON/OFF located under the left side of the scale.
• Scale counts down to zero and displays the version
on the WEIGHT display
• Allow scale to warm up for 15 to 20 minutes before use.
Para Español, vea páginas 11-20.
appears
.
1119 IH-1114
Tabla de contenido
loading

Resumen de contenidos para Uline H-1114

  • Página 11: Antes De Usar La Báscula Contadora

    H-1114, H-1115 π 800-295-5510 H-1116, H-1117 uline.mx BÁSCULA INDUSTRIAL CONTADORA ANTES DE USAR LA BÁSCULA CONTADORA Para mejor funcionamiento la báscula deberá ser 3. Evite colocar la báscula en la luz directa o cerca de la colocada en un lugar fresco y seco, que esté libre de salida del sistema de extracción de la ventilación.
  • Página 12: Pantallas Digitales

    PANTALLAS DIGITALES UNIT WEIGHT (UNIDAD DE PESO) Pesa cada uno de los objetos colocados sobre la plataforma de pesaje o totaliza el número de pesajes. WEIGHT UNIT WEIGHT 0.0.0.0.0. 0.0.0.0.0. SMPL QUANTITY (CANTIDAD0 → 0← El número de objetos (conteo) sobre la plataforma de pesaje o el número total de objetos que están siendo 0.0.0.0.0.0.
  • Página 13: Establezca Las Funciones

    ESTABLEZCA LAS FUNCIONES ESTABLEZCA "LBS" O "KG" Presione ZERO, después 8. Para lbs. presione UNIT WEIGHT PRESET, después 1. WEIGHT UNIT WEIGHT QUANTITY SMPL → 0← 2. Para kg. presione UNIT WEIGHT PRESET, después 2. STABLE 3. La báscula muestra el peso en "kg" o "lbs" hasta que 2.
  • Página 14: Continuación De Establezca Las Funciones

    CONTINUACIÓN DE ESTABLEZCA LAS FUNCIONES UNIDAD DE PESO PREDETERMINADA DE DOBLE 3. Puede establecer la forma en que M+ opera. FUNCIÓN PRIORITARIA 0 = M+ opera solamente cuando el peso está estable. Puede establecer la tecla UNIT WEIGHT PRESET para determinar cualquiera de sus funciones (unidad de 1 = M+ opera aunque el peso no está...
  • Página 15: Uso De La Báscula

    USO DE LA BÁSCULA CONTEO NOTA: Mientras más grande sea el peso de la muestra, el conteo será más preciso. Establezca el peso de las piezas de los artículos que NOTA: Con ambas pantallas la UNIT WEIGHT están siendo pesados antes de realizar cualquier y QUANTITY mostrando cero, presionando función de conteo.
  • Página 16: Continuación De Uso De La Báscula

    CONTINUACIÓN DE USO DE LA BÁSCULA CONTINUACIÓN DE TARA ACUMULADO CUANDO CONOCE EL PESO DEL CONTENEDOR (TARA Utilice el M+ hasta 99 veces antes que sea reiniciado. PREDETERMINADA) La pantalla de totalización está limitada a un máximo de seis dígitos. I.
  • Página 17: Calibración

    CONFIGURE UNA UNIDAD DE PESO PREDETERMINADA NOTA: Las pesas de calibración se venden por separado. Para más información vea uline.mx. Utilice el teclado numérico (0-9) para ingresar el valor Con la báscula mostrando "0", presione y libere las teclas de la unidad de peso que desea grabar.
  • Página 18: Límites De Cantidad Y Peso Predeterminados

    CONTINUACIÓN DE USO DE LA BÁSCULA CONTINUACIÓN DE RECUPERE UNA UNIDAD DE PESO PARA BORRAR EL LÍMITE ALTO DE LA CANTIDAD PREDETERMINADA PREDETERMINADA Presione y sostenga UNIT WEIGHT PRESET. Presione QTY PRESET con o sin peso sobre la báscula. 2. Ingrese 0. WEIGHT UNIT WEIGHT QUANTITY...
  • Página 19: Apagado Automático

    CONTINUACIÓN DE USO DE LA BÁSCULA APAGADO AUTOMÁTICO 5. Ingrese 02 utilizando las teclas numéricas. FnC 02 6. Presione la tecla MC. Aparecerá en la Cuando se activa el tiempo de apagado automático, pantalla de WEIGHT y se mostrará en la pantalla la báscula se apagará...
  • Página 20: Solución De Problemas

    Retire la batería y conecte la báscula. Si la báscula enciende, necesita reemplazar la batería. π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA 800-295-5510 uline.mx PAGE 20 OF 30 1119 IH-1114...

Este manual también es adecuado para:

H-1115H-1116H-1117

Tabla de contenido