Important Safety Notice; Year Warranty - Stanley INTELLILASER PRO Manual De Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Wallpaper
There will be no difference in the function of the stud sensor on surfaces covered with wallpaper or fabric
unless the coverings contain metallic foil or ibers.
Ceiling or Textured Surfaces
When dealing with a rough surface such as a sprayed ceiling, use a piece of cardboard when scanning the
surface. Run through the calibration technique described earlier WITH the piece of cardboard between the
stud sensor and the surface. Also, it is particularly important in this application to remember to keep your free
hand away from the unit.
Note: The thickness, density and moisture content of the surface material will affect the sensing depth.

IMPORTANT SAFETY NOTICE

Warning: Ensure proper detection of live wire. ALWAYS hold the IntelliLaser
only. Grasp between ingers and thumb while maintaining contact with your palm.
SPECIFICATIONS
(At 35-55% relative humidity)
Battery
Depth Range
Wood or Metal Studs
Live AC Wires (120/240 volts AC)
Laser Class
Laser Wavelength
Laser Line Accuracy
Laser Line Length
Laser Auto-Off
Operating Temperature
Storage Temperature

1-YEAR WARRANTY

Stanley warrants its electronic measuring tools against deiciencies in materials and / or
workmanship for one year from date of purchase.
Deicient products will be repaired or replaced, at Stanley's option, if sent together with
proof of purchase to:
Stanley Black & Decker
210 Bath Road
Slough, Berkshire SL1 3YD
UK
9 volt Alkaline Type 6LR61(not included)
Up to 1" (25 mm) through drywall
Up to 2" (50 mm) through drywall
2
Max Output <1 mW @ 630 - 690 nm
½" (12 mm) @ 20' (6 m)
Up to 20 ft (6 m)
After 1 hour
+50°F to +90°F (+10°C to +32°C)
-4°F to +150°F (-20°C to +66°C)
TM
Pro in the handle area
GB
5
Tabla de contenido
loading

Tabla de contenido