Kärcher MV 3 Manual Del Usuario página 15

Illustration

To connect an electric tool.
Carrying handle

To carry the appliance or to remove
the appliance head after unlocking.
Cable hook
Illustration

To store the mains cable.
Blowing connection
Illustration

Connect the suction hose to the
blower connection, this will activate
the blower function.
Container closure
Illustration

Pull out to open, push in to lock.
Parking position
Illustration

To rest the floor nozzle during work
interruptions.
Accessory mount
Illustration

The accessories compartment al-
lows the storage of suction pipes
and suction nozzles on the appli-
ance.
Steering roller
Illustration

The steering rollers are located in
the compartment when the appli-
ance is delivered. These must be
attached prior to starting up the ap-
pliance.
Filter bag
Note: Do not use a filter bag for wet
vacuuming!
Illustration

Recommendation: To vacuum fine
dust, use the filter bag.
Cartridge filter
Illustration

The cartridge filter must always be
installed - with wet and dry vacuum-
ing.
Note: Let the wet cartridge filter dry pri-
or to using it for dry vacuuming.
Suction hose with connecting
piece
Illustration

Push the suction hose into the con-
nection on the appliance, it snaps in
place.

In order to disconnect it, push down
with your thumb and pull the suction
hose out.
Note: Accessories, such as suction
brushes (optional) can be directly at-
tached to the connecting piece and
thus connected to the suction hose.
For convenient working even in tight
spaces.
The removable handle can be attached
between the accessories and the suc-
tion hose if necessary.
See position 14.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
Removable handle
Illustration

Connect the handle with the suction
hose until it snaps in place.
Illustration

To remove the handle from the suc-
tion hose, press the notch using
your thumb and pull off the handle.
EN
– 8
15