Operation - Kärcher MV 3 Manual Del Usuario

Note: Due to removing the handle, ac-
cessories can be directly attached to
the suction hose.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
See position 13.
Suction tubes 2 x 0.5 m
Illustration

Put both suction pipes together and
connect them with the handle.
Crevice nozzle

For edges, joints, heaters and hard
to reach locations.
Floor nozzle
(with inserts)
Illustration
For appliances with only one insert:

Note: For vacuuming dry dirt or wa-
ter off the floor - always work with
the insert (brush strip and rubber
lip) in the floor nozzle.
For appliances with two inserts:

When vacuuming dry dirt off the
floor, clip an insert with two brush
strips into the floor nozzle.

When vacuuming water off the
floor, clip an insert with two rubber
lips into the floor nozzle.
Adapter
Illustration

To connect the suction hose with an
electric tool

Adapt the adapter to the connection
diameter of the electric tool using a
knife if necessary.
16
Caution
Always work with an inserted
cartridge filter during wet as well
as dry vacuum cleaning!
Before Startup
Illustration

Mount loose parts delivered with
appliance prior to start-up.
Illustration

Connect accessories.
Illustration

Plug in the main plug.
Illustration

Turn on the machine.
Dry vacuum cleaning
Caution
Check the filter for damage prior
to installation and replace as
necessary.
Work with a dry cartridge filter
only!
Illustration

Recommendation: To vacuum fine
dust, use the filter bag.
Information filter bag
The filling level of the filter bag de-
–
pends on the dirt that is sucked in.
The filter bag needs to be replaced
–
more frequently while sucking in
fine dust, sand, etc.
Clogged filter bags can burst -
–
therefore make sure to replace the
filter bag in a timely manner!
Caution
Vacuum cold ashes only when
using a pre-filter.
Order no. basic design: 2.863-139.0,
premium design: 2.863-161.0.
EN
– 9

Operation

Start up