Joovy Toy Caboose 04X Manual Del Usuario página 3

4 Installing/Removing the Front Wheels
• Tilt the stroller backward, on a clean surface, so that it rests on the handlebar and the rear wheels.
• Take one of the front wheels and insert the post into the front wheel housing until an audible click is heard. See Figure 4.1.
• Pull outward on the wheel to ensure the wheel is installed properly.
• Repeat this procedure for the other wheel.
5 Installing and Operating the Canopy
• To attach the canopy, orient the canopy on the stroller with the wide front edge toward the front of the stroller.
• Line up the fittings on the canopy with the fittings near the center of the stroller and slide the canopy on until it snaps into place.
See Figure 5.1.
• The canopy will open, close and ratchet forward or backward.
• To remove the canopy, slide the canopy off the fittings.
6 Attaching/Detaching the Front Tray
• To attach the front tray, line up the tray with the tubing on the front of the stroller and push inward until the tray snaps into place.
See Figure 6.1. Pull outward on the tray sides to be sure both are snapped securely in place.
• To remove the front tray, press the button on the bottom of each of the tray fittings while pulling outward on the tray. See Figure 6.2.
7 Adjusting the Footrest
The footrest can be adjusted to two positions, horizontal or all the way down.
• To place the footrest into the horizontal position, pull up on the footrest and the metal bar until the footrest catches into position. See
Figure 7.1.
• To place the footrest all the way to its down position, pull up on the footrest to release the bar from the slot, and then slowly lower the
footrest.
8 Securing the Front (Seated) Doll
• Unlatch the harness buckle by pressing down on button in the center of the buckle and removing the male sides.
• Place the doll in the stroller seat with the shoulder straps over their shoulders and chest and the crotch strap between the doll's legs.
• Bring the seat belt around the doll's waist and snap the buckle together. See Figure 8.1. Tighten the seat belt to be snug around the doll's
waist.
• Both the shoulder straps and the waist/crotch straps may be adjusted using the sliding buckles on these straps.
NEVER use this toy to carry a baby or child for any purpose whatsoever. Death or Serious Injury may occur.
9 Seatback Positioning
The front seat has two positions.
• To place the seat in the upright position, push the bar on the rear of the seat toward the front of the stroller and rotate the seatback towards the front of the stroller until this bar is locked in its lowest position. See Figure 9.1.
• To recline the seat, pull the bar on the rear of the seat toward the rear of the stroller and rotate the seatback down until this bar is again in
its lowest position.
10 Securing a Rear Standing Doll
• Push the bench seat to its most forward position.
• Position the doll on the platform on the back of the stroller facing forward with both of their hands on the handles. See Figure 10.1.
• Position the safety belt around the doll's waist and under the armpit and secure it tightly.
11 Using the Bench Seat
• Push the bench seat to its most rearward position.
• Position the doll on the bench seat facing backward with their feet on the platform.
• Unlatch the seat belt buckle by pressing down the button in the center of the buckle and removing the male sides of the buckle.
• Place the seat belt completely around the doll's waist, place the crotch strap between the doll's legs and snap the buckle together. See
Figure 11.1.
• Adjust the seat belt to be snug around the doll's waist by using the adjustment strap near the buckle.
WARNING
!
This product is a TOY stroller for dolls or stuffed toys ONLY.
Maximum weight allowed = 5 lbs. (2.28 kg) in EACH seat.
WARNING
!
Children should NEVER stand on the platform.
Riding is for dolls ONLY.
EN FR ES