Triton Blue 24/48 TR C 2448 Manual De Usuario página 5

14. Segment Display: Shows the current activity or programming state.
15. Insert / % or 0-255: Insert is to add one step or steps into a scene. % or
0-255 is used to change display value cycle between % and 0-255.
16. Edit/All Rev: Edit is used to activate Edit mode. All Rev is to reverse the
chasing direction of all programs.
17. Add or Kill/Rec Exit: In Add mode, multiple scenes or Flash buttons will be
on at a time. In Kill mode, pressing any Flash button will kill any other scenes
or programs. Rec Exit is used to exit from Program or Edit mode.
18. Record/Shift: Record is used to activate Record mode or program a step.
Shift functions only used with other buttons.
19. Master A Button: Brings channel 1-12 to full of current setting.
20. Park Button: Used to select Single/Mix Chase, bring Channel 13-24 to
full of current setting, or momentarily program a scene into Master B slider,
depending on the current mode.
21. Hold Button: This button is used to maintain current scene.
22. Step Button: This button is used to go to next step when the Speed Slider
is pushed to the bottom or in Edit mode.
23. Audio Button: Activates audio sync of chase and audio intensity effects.
24. Master Slider A: This slider controls overall output of all channels.
25. Master Slider B: This slider controls the chase of all channels.
26. Blind Button: This function takes the channel out of the chase of a program
in CHNS/SCENE mode.
27. Home Button: This button is used to deactivate the Blind.
28. Tap Sync Button: Repeatedly tapping this button establish the chase
speed.
29. Full On Button: This function bring overall output to full intensity.
30. Black Out Button: This button is used to kill all output with exception for that
resulting from Flash and Full On.
31. Fade Time Slider: Used to adjust the Fade Time.
32. Speed Slider: Used to adjust the chase speed.
33. Audio Level Slider: This slider controls the sensitivity of the Audio input.
34. Fog Machine Button.
Rear Panel:
ON OFF
35
35. Power Switch: This switch controls turning on or off the power.
36. DC Input: DC 12-20V, 500Ma Min.
37. MIDI Thru/Out/In: MIDI ports for connection to a sequencer or MIDI
device.
38. DMX Out: This connector sends your DMX value to the DMX fixture or
TR-SRL-574
DC INPUT MIDI
THRU OUT IN
DC 12V 20V
500 mA min
36 37
DMX OUT AUDIO
1=Ground 1=Ground
2=Data- 2=Data+
3=Data+ 3=Data-
2 LINE IN
1
100mV 1Vp-p
DMX polarity select
3
38 39 40
Pag. 5
REMOTE FOG MACHINE
1/4"stereo jack
Full on
Stand By
or Black Out GND
41 42
English