Black Out - Triton Blue 24/48 TR C 2448 Manual De Usuario

22-117
118
119
120
121
122
123
124
125
126
VI.- BRIEF OF MAIN FUNCTIONS
1. Reverse the direction of the scene
1) Reverse the direction of all the scenes. Press the ALL REV Button, all the
scenes should change their directions.
2) Reverse the chaseing direction of all the programs with speed control:
Press the Chase Rev Button.
3) Reverse the chaseing direction of all the programs with standard beat:
Press the Beat Rev Button.
4) Reverse chaseing direction of any program: Press and hold down the
Rec One Button, then press down the Flash Button corresponding to your
desired program and release together.
2. Fade Time
1) The amount of time it will take for the dimmer to go from zero output to
maximum output, and vice verse.
2) Fade time is adjusted through the Fade Time Slider, which varies from
instant to 10 mimutes.
3. Tap Sync Button
1) The Tap Sync button is used to set and synchronize the chase rate (the
rate at which all scenes will sequence) by tapping the button several
times. The chase rate will synchronize to the time of the last two taps. The
LED above the Step Button will flash at the new chase rate. The chase
rate may be set anytime whether or not a program is running.
2) Tap Sync will override any previous setting of the speed slider control until
the slider is moved again.
3) Use of Tap Sync in setting a standard beat is the same with speed control
English
[16H-45H] channel light
[76H]
[77H]
[78H]
[79H]
[7AH]
[7BH]
[7CH]
[7DH]
[7EH]
Pag. 12
activate Channel
1-48
FULL-ON
DARK
HOLD
Turn on or off
AUDIO
CHNS
SCENES
DOUBLE
PRESET Mode
SINGLE PRESET
Mode
Step

BLACK OUT

TR-SRL-574