Triton Blue 24/48 TR C 2448 Manual De Usuario página 11

16, the relevant channel LED lights indicating MIDI OUT channel is set.
5.3 Exit MIDI Setting
Press and hold down the Record button. While holding down the Record button
tap the Rec Exit button to exit MIDI setting.
5.4 Receiving MIDI File Dump
Tap the Flash button 3 three time while holding down the Record button, the
Segment Display reads "IN" indicating the controller is ready to receive MIDI
file dump.
5.5 Sending MIDI File Dump
Tap the Flash button 4 three time while holding down the Record button, the
Segment Display reads "OUT" indicating the controller is ready to send a file.
NOTE:
1) During file dump, all other operations will not function. Functions will
automatically return when the file dump is completed.
2) File dump will be interrupted and stop if errors occur or power failure.
5.6 Implementation
1) During receiving and sending MIDI data, all MIDI scenes and channels
being run will automatically paused if there is no response within 10
minutes.
2) During receiving and sending file dump, the controller will automatically
search for or send Device ID of 55h(85), a file named DC2448 with an
extension of "BIN(SPACE)".
3) File dump allows this controller to send its MIDI data to next unit or other
MIDI devices.
4) Threr are two types of file dump mode described as below:
5) The controller will send and receive Note On Off data via the Flash
buttons.
NOTE NUMBER
Decimal
22-69
TR-SRL-574
Open Loop Mode
CONTROLLER
MIDI OUT MIDI IN
Close Loop Mode
CONTROLLER
MIDI OUT MIDI IN
Hex
[16H-45H]
RECEIVER
MIDI OUT MIDI IN
RECEIVER
MIDI OUT MIDI IN
VELOCITY
Program master
Pag. 11
FUNCTION
Turn on or off
program 1-48
English