Triton Blue 24/48 TR C 2448 Manual De Usuario página 13

slider.
4. Master Slider
Master Slider control provides proportion level control over all channels and
scenes with the exception of the Flash Buttons. For example:
Whenever the Master slider control is at minimum all stage outputs will be at zero
except for any resulting from a Flash Button or FULL ON Button.
If the Master is at 50%, all outputs will be at only 50% of the setting of current
channel or scenes except for any resulting from a Flash Button or FULL ON
Button.
If the Master is at full all outputs will follow the unit setting.
Master A always controls outputs of channels. Master B controls program or a
scene except in Double Press Mode.
5. Single Mode
1) All programs will run in sequential order starting in the order of program
number.
2) The Segment Display will read the running program number.
3) All programs will be controlled by the same Speed Slider.
4) Press the MODE SELECT BUTTON and select "CHNS
5) Press the PARK BUTTON to select SINGLE CHASE MODE. A red LED
will indicate this selection.
6. Mix Mode
1) Will run all programs synchronously.
2) All programs can be controlled by the same SLIDER SPEED, or each
programs speed may be controlled individually. (See Speed Setting).
3) Press the MODE SELECT BUTTON and select "CHNS
4) Press the PARK BUTTON to select MIX CHASE MODE. A yellow LED will
indicate this selection.
7. Dimmer Display
1) The 3-Digit Seqment Display is used to display intensity percentage or
absolute DMX value.
2) To change between percentage and absolute value: Press and hold the
Shift Button. While holding down the Shift button press the 5 or 0-255
Button to switch between percentage and absolute values.
3) If the Segment Display reads, for example, "076", it means a percentage
value 76%. If the Segment Display reads "076", it means the DMX value
76.
8. Blind and Home
1) Blind function takes channels temporally out from a chase, when the
chase is running, and gives you manual control over the channel.
2) Press and hold the Blind Button and tap the relative Flash Button you
want to temporarily take out of the chase.
3) To return to normal chase again press and hold the Home Button and
push the Flash Button you want to return to normal chase.
TR-SRL-574
Pag. 13
SCENES".
SCENES".
English