Caring For Filters; Cleaning Metal Grease Filters - Faber INLT21SSV Instrucciones De Instalación Información De Uso Y Cuidado

underside of the wall unit (Minimum 650 mm
from the Cooker Hob).

CARING FOR FILTERS

as shown.

CLEANING METAL GREASE FILTERS

The metal grease filters can be cleaned in hot detergent solution or washed
place.
in the dishwasher. They should be cleaned every 2 months use, or more fre-
quently if use is particularly heavy.
1. Open the Panel by pulling it down.
2. Remove the filter, pushing the lever towards the back of the unit
and at the same time pulling downward.
underneath the hood.
3. Wash the filter without bending it, leave it to dry thoroughly before
replacing (if the surface of the filter changes color over time, this
will have absolutely no effect on its efficiency).
4. Replace, taking care to ensure that the handle faces forward.
5. Cleaning in dishwasher may dull the finish of the metal grease filter.
fixing pin lever.
6. Close the Panel.
7. Completely dry the filters before installing back into the hood. No
water should be trapped in the filter before reinstalling.
using the 6 screws 12f, re-
connect the wires to the
Commands and Light, re-
place the metal grease filter
and the Panel.
Z
25